Mine Health and Safety Act, 1996 (Act No. 29 of 1996)RegulationsGuideline for a Mandatory Code of PracticeRisk Based Emergency Care on a MinePart C: Format and Content of the Mandatory Code of Practice8. Aspects to be addressed in the Code of Practice |
The COP must set out how significant risks identified and assessed in terms of the risk assessment process referred to in paragraph 7.1, will be addressed. The COP must cover at least the aspects set out below:
8.1 | Determining emergency care requirements for each working site: |
The COP should set out a process for determining the emergency care requirements for each work site. In order to provide appropriate emergency medical care this process should entail at least the following steps:
8.1.1 Risk rating of the work site
The employer should use a risk assessment process to classify each work site into low, medium or high risk for employees requiring emergency care. As the risk rating increases so do the requirements for emergency care services in terms of the number and qualifications of first aid providers and the type and quantities of first aid equipment and other supplies.
8.1.2 | Calculating the response time and classifying the work sites |
In order to calculate the response time to the emergency and classify work sites in terms of response time, the COP should require that the following steps be taken:
Step 1: Determine the EMS response time to the operation site.
EMS response time is the time from calling EMS to the time that the EMS arrives on the operation site;
Step 2: Determine the time to the side of the patient.
The time it would take for the EMS staff to get from the point of arrival on site to the side of the patient to start administering treatment. This will depend on several local factors such as opencast vs. underground mining work site, depth/level of work site underground, size of surface operation, etc.
Step 3: Response time to the emergency = EMS response time to the operation site plus the time to the side of the patient.
Step 4: Classify work sites in terms of response time.
• | Close Work Site = Time to site < 30 minutes |
• | Distant Work Site =Time to site 30 -60 minutes |
• | Isolated Work Site = Time to site > 60 minutes |
8.1.3 | Establishing First Aid requirements |
Once each working site has been appropriately rated in terms of risks; and response time established, the first aid requirements must be determined in accordance with the following:
8.1.3.1 | Number of employees at the work site per shift; |
8.1.3.2 | Level of first aid training that could be required by persons having to administer first aid; |
8.1.3.3 | First aid equipment (pack) as illustrated in table in Annexure C; and |
8.1.3.4 | Special risks, e.g. cyanide poisoning, pregnancy, etc. |
8.1.4 | Determining appropriate First Aid Competencies |
8.1.4.1 | Determine number of first aiders that need to be trained to ensure appropriate emergency care can be provided at all times. |
8.1.4.2 | Determine the appropriate levels of first aid competencies that could be required at each work site having regard to the different levels of competencies in Table 1 below. |
LEVEL RANKING |
NQF STANDARDS |
COMPETENCIES
|
|||||||||||||||||||||||||||||||||||||
Most competent
|
Competencies to be customised to the mining industry and aligned to the first aid standards of the Sectoral Education and Training Authority (SETA), as established under the Skills Development Act No. 97 of 1998. |
||||||||||||||||||||||||||||||||||||||
NQF Level 3
First Aid Training |
First Aid for cyanide poisoning (Additional training where the risk exists/applies)
|
||||||||||||||||||||||||||||||||||||||
NQF Level 2
First Aid Training |
|
||||||||||||||||||||||||||||||||||||||
NQF Level 1
First Aid Training |
|
||||||||||||||||||||||||||||||||||||||
Lease competent |
First Aid Awareness |
|
8.1.5 | Control of First Aid Equipment |
The COP must set out a procedure to ensure effective control and management of all first aid equipment.
8.2 | Ensuring sufficient and appropriated trained first aiders |
The COP must set out a procedure to ensure that:
8.2.1 | The first aid training is aligned with levels of first aid competencies that could be required at each work site; |
8.2.2 | Sufficient numbers of first aiders are trained and available to ensure appropriate emergency care can be provided at all times; |
8.2.3 | The first aid training provided to employees complies with First Aid unit standards determined by the South African Qualifications Authority and recognised by the Mining Qualifications Authority; |
8.2.4 | The First Aid training is conducted by an accredited service provider and refreshers are conducted at appropriate intervals; |
8.2.5 | The accredited service provider must have a programme to ensure quality control of systems and competencies of trainers, as well as updated training material; and |
8.2.6 | The minimum competencies of first aiders are as set out in table 1. |
8.3 | Transfer and transportation arrangements from the mine |
If the required level of emergency care is beyond the capabilities of the first alders and facilities available at the mine, appropriate alternative pre-hospital transfer and transportation arrangements must be in place. In order to ensure that the patient is transferred and transported in accordance with the requirements for the type of emergency care required, the COP must set out a procedure to ensure that:
8.3.1 | Where required, transfer agreements with service providers are entered into for transportation and recipients of transfers, such as ambulance services and neighbouring hospitals; |
8.3.2 | The patient is stabilised before transfer, in order to avoid further complications; |
8.3.3 | Any receiving health facility /institution is given adequate prior notice about the transfer and the condition of the patient; |
8.3.4 | Where possible, the patient is informed of the need to be transferred to a health care facility; |
8.3.5 | The patient's information is appropriately recorded in an accident/ incident register; and |
8.3.6 | Follow -up is done to confirm the patient's arrival and acceptance by the receiving health facility/institution. |
8.4 | Information related to emergency care signage |
The COP must set out a procedure to ensure that emergency care signage is brought to the attention of all persons at a mine, which measures could include the display of appropriate, prominently displayed and clearly visible notices at working sites. In respect of notices and signs, note should be taken of SANS standards 0400 SABS 1186.