Acts Online
GT Shield

National Road Traffic Act, 1996 (Act No. 93 of 1996)

Notices

K53 Practical Driving Test for Motor Vehicle Drivers, Volume 2 - Heavy Motor Vehicles : Codes CI, C, ECI and EC

6. The modules

Module 4: Starting and switching off procedures

 

Starting engine:

 

1. Turn the fuel tap/valve "ON", if applicable.
2. Turn ignition key to "ON" position and check operation of warning lights and metres.
3. Ensure that the gear is in neutral. (Green warning light on)
4. Switch the engine "kill" switch to the "RUN" position.
5. Operate the choke, if necessary.
6. Start engine by pressing the start button or by kick starting it.
7. Release starter button/kick starter as soon as engine starts (Fold kick start lever back, if necessary)
8. Cancel choke operation when applicable.

 

 

Stopping engine:

 

1. Switch accessories off, if applicable.
2. Stop engine by operating the engine 'kill' switch.
3. Turn ignition key to "OFF" position.
4. Turn fuel tap/valve off, if applicable.
5. Select first gear, if applicable.

 

 

Note A:

 

For certain motorcycles it is necessary to pull in the clutch and/or return the side stand to the secure position in order to start the engine.