(1) |
No contractor may use or permit any person to use an explosive actuated fastening device, unless— |
(a) |
the user is provided with and uses suitable protective equipment; |
(b) |
the user is trained in the operation, maintenance and use of such a device; |
(c) |
the explosive actuated fastening device is provided with a protective guard around the muzzle end, which effectively confines any flying fragments or particles; and |
(d) |
the firing mechanism is so designed that the explosive actuated fastening device, will not function unless— |
(i) |
it is held against the surface with a force of at least twice its weight; and |
(ii) |
the angle of inclination of the barrel to the work surface is not more than 15 degrees from a right angle. |
(2) A contractor must ensure that—
(a) |
only cartridges suited for the relevant explosive actuated fastening device, and the work to be performed, are used; |
(b) |
an explosive actuated fastening device is cleaned and examined daily before use and as often as may be necessary for its safe operation by a competent person who has been appointed for that purpose; |
(c) |
the safety devices of an explosive actuated fastening device are in good working order prior to use; |
(d) |
when not in use, an explosive actuated fastening device and its cartridges are locked up in a safe place, which is inaccessible to unauthorized persons; |
(e) |
an explosive actuated fastening device is not stored in a loaded condition; |
(f) |
a warning notice is displayed in a conspicuous manner in the immediate vicinity wherever an explosive actuated fastening device is used; and |
(g) |
the issuing and collection of cartridges and nails or studs of an explosive actuated fastening device are— |
(i) |
controlled and done in writing by a person having been appointed in writing for that purpose; and |
(ii) |
recorded in a register by a competent person and that the recipient has accordingly signed for the receipt thereof as well as the returning of any spent and unspent cartridges. |