Acts Online
GT Shield

Occupational Health and Safety Act, 1993 (Act No. 85 of 1993)

Regulations

Regulations for Hazardous Chemical Agents, 2020

Annexures

Annexure 3 : Hazardous Chemical Agent Guidelines

Guidance on medical surveillance and biological monitoring

Methods of measurement and calculation for determining fibre concentrations of man-made mineral fibres

Asphyxiants

 

102. Some gases and vapours, when present at high concentration in air, act as simple asphyxiants by reducing the oxygen content by dilution to such an extent that life cannot be supported. Many asphyxiants are odourless, colourless and not readily detectable. Monitoring the oxygen content of the air is often the best means of ensuring safety. The oxygen content of air in the workplace should never be allowed to fall below a minimum of 19% by volume under normal atmospheric pressure. Particular care is necessary when dense asphyxiants, e.g. argon, are used since very high localised concentrations can arise due to their collecting in pits, confined spaces and other low-lying areas where ventilation is likely to be poor. Many asphyxiants present a fire or explosion risk. The concentrations at which these risks can arise are liable to be well below those levels at which asphyxiation is likely to occur and should be taken into account when assessing the hazards.