Intellectual Property Rights from Publicly Financed Research and
R 385
Occupational Health and Safety Act, 1993 (Act No. 85 of 1993)Electrical Installation Regulations, 20095. Design and construction |
(1) | No person may authorise, design, install or permit or require the installation of an electrical installation, other than in accordance with a health and safety standard incorporated into these Regulations under section 44 of the Act. |
(2) | No person may use components within an electrical installation unless those components comply with the standards referred to in the relevant incorporated standard referred to in subregulation (1), and proof of compliance shall be identifiable on the components or certification shall be available from the manufacturer or supplier of the materials or components in terms of the National Regulator for Compulsory Specifications Act, 2008 (Act No. 5 of 2008). |
(3) | Items of an electrical installation not covered by an incorporated health and safety standard, and the conductors between the point of supply and the point of control, shall be installed in accordance with the by-laws or regulations of the supplier concerned. |
(4) | A registered person shall exercise general control over all electrical installation work being carried out, and no person may allow such work without such control. |
(5) | Where the voltage exceeds 1 kV, a person deemed competent in terms of paragraphs (b), (c) or (d) of the definition of a competent person in regulation 1 of the General Machinery Regulations, 1988, or a person registered in a professional category in terms of the Engineering Profession Act, 2000, shall approve the design of that part of an electrical installation. |
(6) | Where the intention is to supply five or more users from a new point of supply, the user shall appoint an approved inspection authority for electrical installations or a person deemed competent in terms of paragraph (b), (c) or (d) of the definition of a competent person in regulation 1 of the General Machinery Regulations, 1988, or a person registered in a professional category in terms of the Engineering Profession Act, 2000, who shall ensure the compliance contemplated in subregulation (1) from the commencement to the commissioning of the electrical installation. |
(7) | No supplier may restrict the application of a health and safety standard referred to in subregulation (1) when an electrical installation is installed, except where the distribution system of the supplier may be adversely affected by the application thereof. |